Cars4Blog.com

Home | About

Hybrid cars have extremely low emissions and high fuel efficiency, which are definite pros; however, some of the cons of hybrid vehicles include price and environmental hazards of the batteries. Find out if the pros outweigh the cons for hybrid vehicles with this free video from an automotive industry writer and editor.

By: greencar

About the Author:



Create a video blog…instantly.


A hybrid car combines an internal combustion engine with an electric battery, and the vehicles work by starting the car with the battery then switching the power source to the internal combustion engine. Hear about the efficiency of hybrid cars with this free video from automotive industry writer and editor.

By: greencar

About the Author:



Content – Members-Only Content for WordPress


2 Comments Digg Stumble Upon Reddit Del.icio.us Continue Reading
21
Mar
1895 Benz Velo. Along with its contemporary Du...
Image via Wikipedia

Dodge Chrysler 2.7L Engine Problems, Oil Sludge, Defects and Failure

By: John Stanley

From 1998-2000 2.7L Engines are prone to premature catastrophic engine failure due to a defectively designed Timing Chain Tensioner that Chrysler quietly redesigned. Unfortunately, many consumers have had to pay out of their own pockets for this while Chrysler avoids responsibility.

From 1998-2004 Dodge / Chrysler 2.7L Engines are prone to Oil Sludge often caused by internal coolant leakage that has to do with the design of the Water Pump that allows coolant to enter the Engine over time and cause oil sludge, experts at a well known remanufacturing company say. The second common cause of engine sludge is from poor oil circulation caused by oil passages that are too narrow causing the oil to wear down more rapidly unlike normal engines. Another contributing oil sludge factor is possibly due to an inadequately designed PCV system that can also accelerate engine oil breakdown, which Chrysler later made improvements to for the 2005 model year along with other changes knowledgeable sources state. Although Chrysler is aware and there is nothing consumers could have done to cause this, Chrysler still regularly blames consumers for 2.7L Engine Oil Sludge.

Chrysler is aware of certain problems and vulnerabilities the 2.7L Engine is prone to have and has quietly made various design changes over the years such as redesigning the Timing Chain Tensioner that was prone to premature failure in 2000, to making changes to try and prevent internal coolant leakage over time into the crankcase. For 2005, changes included improvements to the PCV system and for oil circulation, to even later increasing oil capacity by an extra quart in an attempt to make the engine more robust. Unfortunately, even with all of these modifications we have been informed of premature Dodge / Chrysler 2.7L Engine failures in 2006 Dodge, Chrysler vehicle models.

Chrysler refuses to cover prematurely failed engines even when under its own 3 Year / 36,000 mile warranty while blaming consumers for these problems. These problems are so common and so well known that extended warranty companies also decline to cover Chrysler 2.7L engines. In many cases consumers have changed or had their oil changed every 3,000 miles with name brand motor oil. Many consumers have been able to provide proof while Chrysler still refuses to cover failed 2.7L engines under warranty. It is a common misconception that sludge is caused by brand or type of motor oil since all motor oil sold must meet the same basic standards. However, if the oil was changed regularly then Chrysler might say ‘it must be the brand or type of oil you used then’. If you can prove that you used a leading motor oil, ‘where did you have it changed?’. Chrysler might then tell you they are not going to be able to cover it then because you changed your oil yourself or had it changed somewh ere else. In fact Federal Law (Magnuson-Moss Act) prohibits an automobile manufacturer to void a warranty or deny warranty claim based on using aftermarket tune up or maintenance parts, such as spark plugs or motor oil for example or 3rd party service, unless provided free of charge. There are other consumers who have followed the intervals recommended by Chrysler in their vehicle’s owners manual that state oil changes up to every 7,500 miles are acceptable in normal conditions where they’ve changed their oil every 5,000-6,000 miles only to be told ‘you didn’t change your motor oil enough and your engine failed due to neglect’. In fact, Chrysler even currently recommends oil change intervals of every 6,000 miles for normal conditions in current owners manuals. When vehicles are purchased used from dealers and used car lots where consumers often believe they have no proof of regular oil changes prior to their ownership, Chrysler typically automatically refuses warranty claim s blaming the previous owner. When a consumer has proof or reg ular 3,000 mile oil changes performed by a dealer we’ve heard of Chrysler going as far as to blame the dealer’s lube technician!

To find out more and how to fight this, visit http://www.dodgechryslerengineproblems.com

Article Source:
http://www.articlecity.com/articles/auto_and_trucks/article_2399.shtml

Reblog this post [with Zemanta]


No Comments Digg Stumble Upon Reddit Del.icio.us Continue Reading
03
Mar
mazda
Mazda was not quite a full fledged automotive company when it began its work in the industry. The company demonstrated greater involvement with the production of machine tools throughout the early years of its operations. Not until the Toyo Cork Kogyo Co., Ltd finally decided to switch from the production of machine tools to the manufacture of four-wheel rides, would the company finally gain its name, Mazda. It was a great choice name, after the powerful God Ahura Mazda, and quite apt too since Mazda was fated to become one of the giants in the automotive industry. While manufacturing machine tools was a good business, being in the car industry opened up more opportunities for Mazda in terms of profit and development. Witnessing the phenomenal growth that the company has achieved in the automotive market, management officials of the company finally decided to change its name to Mazda Motor Corporation. This allowed Mazda to be truly identified with automobiles since then.

Together with other famous names, brands, and models in the automotive industry, Mazda pioneered a number of new car technologies that left their marks in the history of revolutionary automotive developments. But Mazda didn’t earn its solid reputation the easy way. Employing exacting standards for each and every single auto part produced, Mazda was able to build a reputation solely on the excellence of its cars and car parts. This, however, didn’t stop the company from improving on the quality of their cars and car parts even more.

Over the years, sales of OEM Mazda parts began a steady climb. Market conditions were favorable and contributed a great deal to the surge in consumer demands for OEM Mazda parts. Basically companies that purchase manufactured products from another company in order to resell them, OEM for Mazda grew in number as well, with many OEM companies emerging from the woordwork to provide consumers with exceptional Mazda OEM Parts. All these companies offering Mazda OEM Parts have one goal in mind – to HELP Mazda owners look for suitable replacements to take the place of old and worn Mazda parts. These OEM companies also offer a run of choices for those thinking to add on a few accessories to their beloved vehicles. So, whether it is to secure Mazda part replacements or simply to locate performance parts that would improve the car’s operations, car owners wouldn’t have much trouble in finding what they want since there are lots of Mazda OEM Parts available in the market these days. Caution should still be practiced, however so consumers must take care to get their parts from trusted and reliable Mazda OEM Parts around.



By: Anthony Fontanelle

About the Author:

Anthony Fontanelle is a 35-year-old automotive buff who grew up in the Windy City. He does freelance work for an automotive magazine when he is not busy customizing cars in his shop.



Content


No Comments Digg Stumble Upon Reddit Del.icio.us Continue Reading
28
Jan
mazda
One of the most recognizable brands of trucks is Mazda. Founded in the first quarter of the 20th century, Mazda is one of the biggest Japanese manufacturers of automobiles, and is estimated to produce more than 1 million automobiles per year with sales in Japan, Europe, and North America. But before becoming an international super-company, Mazda was once the Toyo Cork Kogyo Company, which was founded 1920 and manufactured machine tools. And it was not until 1931 that Toyo Cork Kogyo shifted from machine tools to automotives and introduced the Mazda-Go, a three-wheeled truck in 1931. The word Mazda was finally adapted as the company name in 1984, although every automobile sold bore the name Mazda. And from then on and until today, Mazda is one of the leaders in automobile manufacture and technology. Mazda pioneered a lot of fresh innovations previously unknown in the automotive industry, and is the only producer of the Miller cycle engine in the world and the last remaining manufacturer of Wankel engine, which uses a rotor instead of the reciprocating pistons found in most standard internal combustion engines today. Also, Mazda is quite popular in Australia and in 2006 Mazda was one of the highest sold automotive brands in the region.

The secret to the success of Mazda lies in its long tradition of craftsmanship and quality that incorporates into its vehicles. Mazda is the Avestan word for wisdom, and it is the wisdom of many years of superior engineering and technical know-how that Mazda incorporates into its trucks, right down to the smallest Mazda Truck Part and Mazda Truck Accessories. And this is important, since every part and accessory incorporated in the Mazda contributes to its overall performance on the road. There are many Mazda Truck Parts that can be found on the Mazda, but they often share the similar construction. Take the chassis as an example. Most trucks have a frame or chassis that is mainly constructed of two beams and several crossmembers. This type of truck chassis consists of two parallel straight C-shaped beams, or in some trucks stepped or tapered beams, which are held together by the crossmembers. And since trucks are used primarily for heavy duty use such as hauling cargo, truck chassis is usually made of specially tempered steel or in some cases aluminum for lighter weight. And aside from the chassis, most Mitsubishi trucks share similar construction of the engine as well. Heavy duty trucks often use four stroke turbo intercooler diesel engines which provide a lot of torque and horsepower, while light and medium duty trucks such as pickups and SUVs use a more fuel-efficient gasoline engines. Other Mazda Truck Parts that share similarities also include the drivetrain, transmission, and some hydraulic and electrical systems.

But aside from rugged and reliable performance, Mazda trucks can also be fitted with Mazda Truck Accessories to enhance the look of the vehicle. Mazda Truck Accessories such as bike racks, dash trim, floor liner and floor mats give your truck a more stylish look, while grille guards, car covers, bug shield, and hood protectors provide additional protection while adding to the overall appearance to the exterior of the vehicle.



By: amanda nealy

About the Author:

Amanda Nealy is a 26-year-old proprietor of a local car rental service in Montgomery, Alabama. Amanda is the daughter of an automobile designer, and inherited her father’s passion for cars of all kinds. Know more about mazda truck accessories.



Create a video blog…instantly.


No Comments Digg Stumble Upon Reddit Del.icio.us Continue Reading
19
Jan
mazda
In the automotive industry, the Europeans have long patronized the diesel engine and they prefer smaller more economical automobiles. Meanwhile, North Americans who usually carry five people in their cars prefer a minivan and seven-seat SUV. The problem is that the minivan’s polluted brush infects the driver and big SUVs are massive gas consumers. There are city-friendly substitutes now. The Kia Rondo EX V6 Luxury takes on the Mazda5 GT, both offering a minimum of five-plus seats and delivering a spacious cargo area when no one or nothing is occupying the third row.

The two vehicles are stunningly similar. However, they are different right down to the sharp-edged flashing on the glove box door. Seating constitutes the most visible similarity, wherein the Mazda5 has six in a 2+2+2 configuration, while the middle row of Kia has a seventh spot.

Both cars also yield huge flexibility as well as cargo capacity. However, Kia’s headrests in the second row have to be removed first when the middle and third rows flat need to be folded. As regards the cars’ cargo-carrying capacity, Mazda Motor and Kia Motor used different ways to compute the available relative space.

When the third row is moved down, the space produced is almost four times the original. When the centre row is flat, the Rondo is made available up to 73.4 cubic feet. Visually, the Mazda 5 has almost the same space as the Rondo, but its overall height may be slighted affected by its roofline.

As far as accommodations are concerned, both cars have a close fight. Kia has considerably more legroom, knee room and headroom spaces in the third row. The Mazda 5 also has a hard plastic trim piece on the headroom. However, this car has seats that are higher off the floor (270 millimetres compared to the Kia’s 230 mm), which makes it quite more comfortable than the other car.

On both cars’ second row, seats are comfortable and can be moved back and forth. When the third row is vacant, the back seat can be moved and the middle-row seats can be pulled forward, which means more stretch-out space.

While the Mazda has few nice touches like a storage bin under the left middle seat and a handy tray/net under the right, Kia counters those with functional roof rails.

Up front, there are minimal differences between the two. The cars’ driving positions are good, visibility is also good (both feature triangular windows at the A-pillar that reduces what would be a bad blind spot) and the entire layouts are logically conceptualized. Both have air conditioning (a $1,100 option on the Mazda5), great audio packages and power locks, windows, mirrors and sunroofs. The only noticeable difference is the manual adjustment for Mazda’s cloth seats and the power adjusters for the Kia’s heated leather buckets.

The doors also depict differences. The Rondo comes with four conventionally hinged doors while Mazda 5 is available with sliding rear doors. Therefore, the Mazda is easier to load when one is parked in a tight area. The sliding doors deter access to the third row on the down side due to the eating of the leading edge into the way of entry.

On the road, both cars are not like larger minivans or SUVs. As usual, a minimal body roll (both use anti-roll bars front and back) is present as well as any under steer. Both are also available with fitted large tires as well as anti-lock brakes. The Mazda 5 GT uses P205/50R17s, while the Kia uses a 225/50R17s.

Bigger differences are in the power train. The Mazda has a 2.3-liter four-cylinder and a four-speed manumatic (a combination of manual and automatic). The Rondo EX V6 is run by a 2.7L V6 that drives a five-speed manumatic. The base Rondo EX is available with a 162-hp, 2.4L four and a four-speed ******. To reach 100 kilometers, the Mazda needs 9.3 seconds, and 7.6 seconds to make the 80-to-120-km/h passing move. Meanwhile, the Rondo’s V6 engine attains the same performance more quickly in 8.2 and 6.1 seconds, respectively.

The horsepower of the two also has a huge difference. The Mazda yields 153 horsepower and 148 pound-feet of torque at 4,800 rpm while the Kia has 182 hp and 182 lb-ft of torque at 4,000 rpm. The Kia has extra gear and is also gives more silence at highway speeds.

The fuel economy of the two is in close fight. The Mazda5 consumes 11.2 liters for every 100 km in the city and 8.3 L/100 km on the highway while the Kia is rated at 11.8 L/100 km in town driving and 7.9 L/100 km on the highway.

Regarding safety features, the Rondo has standard traction and electronic stability control systems – some of the car’s advantages over the Mazda 5. Nonetheless, both cars come with front and side seat-mounted air bags as well as drop-down side curtains and active headrests.

In summary, both the Mazda 5 and the Kia Rondo outcast any SUV; both have rear seats that are usable; both are stunningly designed and reasonably priced.

Now, it’s your turn to decide which is better. Which is which?

About Mazda 5

With top of the line Mazda tie rod end, the Mazda 5 was formerly called Mazda Premacy in Japan and in Europe. It is a compact MPV built by Japanese auto maker Mazda since 1999.

About Kia Rondo

Kia Rondo is Kia Carens’ name in North America. The Carens is a compact MPV that was introduced in 1999 by the Korean auto manufacturer, Kia.

The Rondo was introduced in North America at the 2007 Los Angeles International Auto Show and began its sales early this year in the US and on the end of 2006 in Canada.



By: Kraig Johanssen

About the Author:

Kraig Johanssen is a native of Connecticut and holds a degree in Software Engineering. He now works at a software development firm in Alabama. His love for writing and great interest on cars makes him a proficient contributing author to various automotive magazines.



Content


No Comments Digg Stumble Upon Reddit Del.icio.us Continue Reading
29
Feb
BMW
Known for its impressive engineering and dynamic performance, the BMW has made its mark on the automotive industry. There are specific characteristics that make a BMW one of a kind. These are standard BMW elements that cannot be found on other cars.

All BMW parts are made with precision and care, to ensure that its commitment to quality is unparalleled. BMW owners are proud of their purchase, and enjoy the unmatched craftsmanship for which BMW cars are famous.

Distinctive BMW Parts and Features

One of the most distinguishing BMW parts is the double kidney grilles. This stylish grille sets the BMW apart from other cars, giving it a handsome finish as it glides down the highway. The double kidney grilles also give the BMW optimal cooling, allowing air to reach the internal parts. This improves performance and reduces wear and tear on the interior parts.

Another one of the outstanding BMW parts is the four headlight setup. These provide optimal lighting no matter the driving terrain, as well as an eye catching display. It is readily apparent that when four headlights are coupled with double kidney grilles that a classic BMW is on the road.

Handling and Safety

There are additional BMW parts that are not as obvious to the ***** eye that create the unique driving conditions that BMW cars are known best for. BMW engines are finely tuned to deliver smooth yet powerful handling under any conditions. Owners know that the BMW is more than a reliable vehicle – owning a BMW is a way of life.

BMW parts are also crafted with safety in mind. From the brakes to the air bags, BMW has always strived to give owners peace of mind while driving their vehicles. The entire structure of the BMW has been honed to deliver security and comfort, as well as a flawless ride. All BMW parts are made of the highest quality materials to appeal to an audience that demands quality over the lowest price.

Driver Responsiveness

Perhaps the most famous attribute of the BMW is its responsiveness to its driver. When operating a BMW, the separation between the driver and the road is blurred. Every direction the car is given is performed seamlessly, thanks to the careful construction of every part underneath the hood. The attention to detail and beauty of a BMW is difficult to match.

With the exceptional craftsmanship and marvelous performance, BMW cars are one of a kind. From the stylish parts on the outside of the car to the durable interior parts, every detail of the BMW is designed for the ultimate driving experience. Any owner of a BMW would not be disappointed with the quality and style of every part of this fine driving machine.

Owning a BMW is an exhilarating experience for any car connoisseur, as well as for the new car lover who is learning the meaning of an unmatchable driving experience for the first time.



By: Cyril Joseph

About the Author:

Cyril Joseph is an author for Above All Motorwerks, an online auto parts retailer that educates visitors about BMW parts and other car topics. Above All Motorwerks is a solid resource for BMW owners and other car lovers who want to learn more about how to maintain their car.



Content


No Comments Digg Stumble Upon Reddit Del.icio.us Continue Reading

Advertisment

Advert (125 x 125)
Advert (125 x 125)
Advert (125 x 125)
Advert (125 x 125)

Tag Clouds

Subscribe Us